Announcement

Collapse
No announcement yet.

Xprintserver

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TechSupport2
    replied
    Not at all. As long as you are not factory resetting the xPS or pressing the reset pinhole button on the bottom. Moving it from network to network to discover printers is an easy way to get multiple network segments printers available.

    Leave a comment:


  • user888
    replied
    Will I lose the previous configuration?

    Leave a comment:


  • user888
    replied
    If I buy a new printer, I just have to turn off xprintserver, put it in the printer network and turn it on

    Leave a comment:


  • TechSupport3
    replied
    Hello, for printer discovery on network where the printer and wireless devices are on different subnets we recommend that you allow the xPrintServer to discover the printers on the printer specific subnet first, then connect the xPrintServer to the wireless subnet. This should allow the xPrintServer to advertise to your wirelesss devices while still able to contact and send information to the printers.

    Leave a comment:


  • user888
    replied
    continuous.. if xprintserver goes down,
    Last edited by user888; 11-26-2018, 09:57 AM.

    Leave a comment:


  • user888
    replied
    Is there any limitation with the number of characters? does not publish the whole message...

    Leave a comment:


  • user888
    started a topic Xprintserver

    Xprintserver

    Hi, I would like to have information about the xprintserver, in order to know if it is good for us. I have three subnets printers, wireless and desktops/laptops. After xprintserver detects and connects xprintserver to the printer's network, if xprinterserver goes down
    Last edited by user888; 11-23-2018, 11:54 AM.
Working...
X