Announcement

Collapse
No announcement yet.

Release 2 Beta 2 version 1.1.0.1R6

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Release 2 Beta 2 version 1.1.0.1R6

    The current Production release is version 1.0.0.0R7 which is factory preloaded onto the modules. This is referred to as Production Release 1.
    As part of the feature rollout process Beta releases are made available. The Beta releases which tested as part of the Beta process have not been fully production tested.

    OTA Upgrade Procedure: Production version 1.0.0.0R7 to Beta 2 version 1.1.0.1R6

    Upgrading from Production Version 1.0.0.0R7 to Release 2, Beta 2 (version 1.1.0.1R6) requires an update to both the bootloader and OTA upgrade loader.

    IMPORTANT: The autoloader (containing both the bootloader and OTA loader upgrades) must be upgraded before the application firmware.

    Upgrade steps:
    Step 1: Connect to the xPico Wi-Fi Web Manager
    Step 2: From the System page in Web Manager, choose "Firmware Upload."
    Step 3: When the upgrade webpage appears, choose and upload the autoloader ROM image file (stm32f2xx_ota_autoloader_1.1.0.0R4.rom).
    Step 4: When the upload is complete, reboot the xPico Wi-Fi. The autoloader will automatically upgrade both the bootloader and the OTA loader onboard the SPI flash.
    Step 5: When the autoloader is finished upgrading, it will present a webpage to allow upgrading the application firmware; now click the "Firmware Upload" button.
    Step 6: To install the application ROM image enter the Beta 2 ROM Image file (xPicoWifi_1.1.0.1R6.rom).
    Step 7: Once the upgrade is complete, remove all power from the xPico Wi-Fi for at least 60 seconds and then restart.

    Please note that Lantronix Technical Support can only support Released Firmware. If you use Beta firmware for the new features or bug fixes, please post any problems that you have on this forum, or contact your Field Applications Engineer.
    Attached Files

  • #2
    Hi

    I have tried it. AutoLoader upgrade works.
    But upgrade firmware results always into "Upgrade incomplete"

    Any help?

    thanks

    Lubomir

    Comment


    • #3
      Lubomir,

      What's the browser that you're using? Could you try using a different browser and see if you also get the "Upgrade Incomplete"?

      Mariano

      Comment

      Working...
      X