Announcement

Collapse
No announcement yet.

New XPort Pro Linux SDK release 2.0.0.8

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New XPort Pro Linux SDK release 2.0.0.8

    Here is the latest Linux SDK for the XPort Pro. It is necessary to use this version to recompile in order to support the new flash in parts with revision C15.

    Firmware created with this version will also work on older revisions. See PCN here:
    https://www.lantronix.com/wp-content...-PCN-446-3.pdf


    This version is deprecated. Please see 2.0.0.10
    Last edited by mariano; 11-06-2017, 04:29 PM.

  • #2
    CMake Error

    I try to make image file using 2.0.0.8 SDK, but below error.

    Our environment is VMware workstation player + Lantronix Linux SDK 2.8 (Ubuntu 14.04)

    Can I use SDK2.8 on VMware?

    Please advise.


    CMake Error: your C compiler: "ucfront-gcc m68k-uclinux-gcc -mcpu=5208 -DCONFIG_COLDFIRE" was not found. Please set CMAKE_C_COMPILER to a valid compiler path or name.
    -- Configuring incomplete, errors occurred!
    make[4]: *** [build/build] Error 1
    make[4]: Leaving directory `/home/lantronix/linuxsdk/linux/lib/libssh'
    make[3]: *** [libssh] Error 2
    make[3]: Leaving directory `/home/lantronix/linuxsdk/linux/lib'
    make[2]: *** [all] Error 2
    make[2]: Leaving directory `/home/lantronix/linuxsdk/linux/lib'
    make[1]: *** [subdirs] Error 1
    make[1]: Leaving directory `/home/lantronix/linuxsdk/linux'
    make: *** [build] Error 2
    lantronix@lantronix-virtual-machine:~/linuxsdk$

    Regards,
    Shinji / ADT

    Comment


    • #3
      Did you forget to source the environment before the make:
      . env_m68k-?Clinux

      Comment


      • #4
        Yes, I do the . env_m68k_uclinux

        When I did the below command.
        $ . env_m68k_uclinux
        $ make config
        $ make menuconfig
        $ make

        we can make image.bin file correctly

        Next we set s2e-ssh as below on manuconfig.

        Kernel/Library/Defaults Selection - - > Customise Application/Library Settings
        Lantronix' Applications - - > s2e-ssh

        After that. we cannot make image.bin file any more.

        We can see below error.

        CMake Error: your C compiler: "ucfront-gcc m68k-uclinux-gcc -mcpu=5208 -DCONFIG_COLDFIRE" was not found. Please set CMAKE_C_COMPILER to a valid compiler path or name.
        -- Configuring incomplete, errors occurred!
        make[4]: *** [build/build] Error 1
        make[4]: Leaving directory `/home/lantronix/linuxsdk/linux/lib/libssh'
        make[3]: *** [libssh] Error 2
        make[3]: Leaving directory `/home/lantronix/linuxsdk/linux/lib'
        make[2]: *** [all] Error 2
        make[2]: Leaving directory `/home/lantronix/linuxsdk/linux/lib'
        make[1]: *** [subdirs] Error 1
        make[1]: Leaving directory `/home/lantronix/linuxsdk/linux'
        make: *** [build] Error 2
        lantronix@lantronix-virtual-machine:~/linuxsdk$

        I see this error on 2.0.0.8SDK only, When I use 2.0.0.3SDK, we can make image.bin file after we set s2e-ssh.

        Comment


        • #5
          What version of Ubuntu are you building with?
          It appears that we updated the cmake package.

          Comment


          • #6
            We use Ubuntu 14.04. But we cannot selected Ubuntu version. because We use "linux_sdk_2_0_0_0_8_VMware_Instal" with VMWare.

            Comment


            • #7
              Ubuntu 16.04

              Can I install SDK on Ubuntu 16.04?

              I get an error : FATAL ERROR Could not build host tools
              in the folder sdk/hostsrc

              Comment


              • #8
                Ubuntu 16.04

                I've also had problems installing the SDK on 16.04 machines, although I have had success on an older 14.04 setup. I'm seeing the same error mentioned in a previous post:

                Code:
                ### Building host tools in /opt/xport-sdk/hostsrc ###
                
                FATAL ERROR: Could not build host tools

                Comment

                Working...
                X