Announcement

Collapse
No announcement yet.

How to check NTPD response in XPORT Pro

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to check NTPD response in XPORT Pro

    Hello,

    I am configuring NTP in Xport Pro linux-sdk.I enabled NTPD and configured ntp.conf file with server ip.I am not seeing ntp response in the processor buffer which i am working is connected to xport pro via UART.

    How to check that xport pro is sending ntp command and receiving response. I checked NTPDATE command from uclinux console it is responding well.How do i confirm same from NTP Daemon(NTPD) in xport pro.

    Any command(similar to cat /dev/ttyS0) to check from uclinux console to see response?

    I tried to create logfile in xport pro but not happening, My ntp.conf contains below two lines

    server 216.239.35.0 minpoll 3 maxpoll 3 iburst
    logfile /var/log/ntpdata.txt

    Please help.Thanks
    harshith
    Last edited by harshith_m; 02-23-2018, 12:43 PM.
Working...
X