Announcement

Collapse
No announcement yet.

Ethernet link state detection not working with XPort Pro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ethernet link state detection not working with XPort Pro

    Hello,

    We need to detect if the Ethernet cable is plugged or unplugged to XPort Pro, but it is not working.

    We try to check via /sys/class/net/eth0/carrier, and "ip link show eth0", but both shows the link UP with the Ethernet calble unplugged.

    Is there a way we can check the link state? Or there is a bug?

    Thanks,
    Julio
Working...
X