Announcement

Collapse
No announcement yet.

Failing to connect to WIFI

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Failing to connect to WIFI

    I got multiple xpico 240. I use them in a place with multiple AP and with roaming enabled.
    I noticed that the xpico can connect to the AP with no problem, but after moving the xpico's they sometimes disconnect.

    When that happens I need to move them again or power-cycle the xpico and everything is fine again.

    The trouble log looks like:
    Code:
     213 I network_co  3595 Taking wlan0 up...                             02:04:08
     214 I ltrx_wlan.   989 Attempting association with Eierdoos.          02:04:08
     215 I ltrx_wlan.  1091 Join failed, code 1024.                        02:04:15
     216 E network_co  3215 Associate profile failed.                      02:04:15
     217 I network_co  3637 Association with 0 failed, try later.          02:04:15
     218 I network_co  3595 Taking wlan0 up...                             02:05:15
     219 I ltrx_wlan.   989 Attempting association with Eierdoos.          02:05:15
     220 I ltrx_wlan.  1091 Join failed, code 1024.                        02:05:22
     221 E network_co  3215 Associate profile failed.                      02:05:22
     222 I network_co  3637 Association with 0 failed, try later.          02:05:22
     223 I network_co  3595 Taking wlan0 up...                             02:06:22
     224 I ltrx_wlan.   989 Attempting association with Eierdoos.          02:06:22
     225 I ltrx_wlan.  1091 Join failed, code 1024.                        02:06:29
     226 E network_co  3215 Associate profile failed.                      02:06:29
     227 I network_co  3637 Association with 0 failed, try later.          02:06:29
     228 I network_co  3595 Taking wlan0 up...                             02:07:29
     229 I ltrx_wlan.   989 Attempting association with Eierdoos.          02:07:29
     230 I ltrx_wlan.  1108 Associated with Eierdoos.                      02:07:32
     231 I ltrx_wlan.  1119 BSSID: ec:58:ea:14:65:9c                       02:07:32
     232 I ltrx_ip.c   1106 wlan0:IPv6 Disabled                            02:07:32
     233 I network_co  3701 wlan0 up.                                      02:07:32
     234 I ltrx_ip.c   1260 wlan0:v6 Up                                    02:07:33
     235 I ltrx_ip.c   1982 wlan0 v4 up.                                   02:07:33
    I'm not sure why they disconnect. There are enough AP around to make sure it can still connect.
    Anybody an idea what goes wrong here and what error code 1024 is?

  • #2
    This is possibly due to the signal not being strong enough to connect. Can you check in the QuickConnect area what the signal strength of the APs is? Do you have an xPico 240 with internal antenna, or external antenna?

    Comment

    Working...
    X