No announcement yet.

XPort Edge: Unexpected Reset behaviour

  • Filter
  • Time
  • Show
Clear All
new posts

  • XPort Edge: Unexpected Reset behaviour

    When you apply a reset signal to the XPort Edge, the part does indeed reset as it is no longer accessible, however, it does not look this way because the 2 network LEDs remain on. Is it possible that the PHY is not also being held in reset during this time? This has already caused me some grief since QA cannot tell if the interface is actually off and our customers will have the same issue. The XPort Pro shuts off all LEDs when held in reset.

    I checked the CLI command list and there did not appear to be a way of manually turning off the PHY or LEDs.

    Any suggestions?