Announcement

Collapse
No announcement yet.

XML corrupted

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • XML corrupted

    Hi,

    my environment is

    -) HW : XPort-Pro
    -) FW : Evolution OS V5.2.0.1.R5

    Writing on flash file system I suppose i made a wrong action and i corrupted the XML Configuration and Status Records.
    I read bad values of all fields from this database.
    How may I restore the factory setup of the whole device?
    Actually i missed the IP address of the device and i'm loading test firmware using the serial port and the Recover Firmware function of DeviceInstaller tool.
    Thanks

    Regards
    Max

  • #2
    Recovering factory default information

    You are headed in the right direction. When using Device Installer's Serial Recovery, make sure you check the box "Erase all flash". This will insure that after recovery, your device database will be clean, reflecting the Lantronix factory defaults.

    Comment


    • #3
      Good. After erasing all flash, the device works well again. Thanks.
      I suppose i corrupted the XML database when i tried to open more than eight files.
      Is there a limitation to eight file pointers opened in the same time?


      Regards.
      Max.
      Last edited by maxximo62; 04-14-2015, 08:27 PM.

      Comment

      Working...
      X